TNP Home Theater Speaker Wall Plate Outlet –

$25.79

Added to wishlistRemoved from wishlist 0
Add to compare


Price: $25.79
(as of Feb 24, 2025 22:34:57 UTC – Details)

Product Description

wall plate speaker banna connectorswall plate speaker banna connectors

Perfect Addition For Your Home Theater System & Wall-mounted Speakers Wiring Setup

Wall plates featuring Banana Plugs, RCA, and HDMI connectors allows the clean connection of speakers, sub-woofer, and HDMI devices in your home theater setup. Is made out of high quality corrosion resistant 24K gold plated brass connectors, easy to install and remove. Each wall plate includes all the screws you need to mount and eliminate the mess of wires strung along your baseboards, contributing to a neat, finished installation. Clear labeling also simplifies room set up and configuration. It’s designed to be used with banana plugs, spades or just bare wire and Works with 5.1, 5.2, 6.1, 6.2, 7.1, & 7.2 channel speaker systems.

wall plates for home theater home theater wall plateswall plates for home theater home theater wall plates

Flexibility for a Custom Media Environment

This home theater plate provides all the flexibility that a professional installer or experienced do-it-yourselfer needs to create a sophisticated media environment. Clear labeling also simplifies room set up and configuration.

home theater wall plate home theater speaker wall platehome theater wall plate home theater speaker wall plate

Clean, Professional In-Wall Connection

The plates are easy to terminate and contribute to a neat looking and finished installation.

wall plate home theater home theater wall plate hdmi wall plate home theater home theater wall plate hdmi

Simple Installation

24K gold plated brass connectors, easy to install and remove. Each wall plate includes all mounting hardware included.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.5 out of 5 stars 36

4.2 out of 5 stars 50

4.5 out of 5 stars 18

4.6 out of 5 stars 50

4.2 out of 5 stars 32

4.6 out of 5 stars 15

Price

— $14.89$14.89
— $15.80$15.80 $17.98$17.98 $7.95$7.95

Count
1 Pack, 2 Pack, 5 Pack 1 Pack, 2 Pack 1 Pack, 2 Pack 1 Pack 1 Pack 1 Pack, 5 Pack, 10 Pack

Support
1 Speaker 2 Speaker 3 Speaker 4 Speaker 5 Speaker 1 Gang Wall Plates

Size
1 Gang 1 Gang 1 Gang 1 Gang 1 Gang 1 Gang

Add to Cart

Add to Cart

Customer Reviews

4.3 out of 5 stars 61

4.3 out of 5 stars 22

4.5 out of 5 stars 127

4.3 out of 5 stars 219

4.5 out of 5 stars 26

4.4 out of 5 stars 671

Price



— $25.79$25.79
— $14.95$14.95

Count
1 Pack 1 Pack 1 Pack 1 Pack 1 Pack, 5 Pack, 10 Pack 1 Pack, 5 Pack, 10 Pack

Support
5 Speaker, 1 Subwoofer 7 Speaker, 2 Subwoofer 7 Speaker, 2 Subwoofer 7 speakers, 1 subwoofer, and 1 HDMI device 2 Gang Wall Plate 2 Gang Wall Plate

Size
2 Gang 2 Gang 2 Gang 3 Gang 3 Gang 2 Gang

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 5 x 5 x 1 inches; 8 ounces
Item model number ‏ : ‎ WP_71SPK_1HDMI_3G
Date First Available ‏ : ‎ August 11, 2016
Manufacturer ‏ : ‎ TNP Products
ASIN ‏ : ‎ B01K7877D2

Allows connection for up to 7 speakers, 1 subwoofer, and 1 HDMI device; an ideal addition for your home theatre setup that works with AV receivers, Audio Video players, DLP, Projectors, Ultra HD UHD HDTV and supports 7.1 / 5.1 surround speaker setup
High amperage and high wattage capabilities. Fit’s any standard 3 gang low voltage box
It’s made out of high quality corrosion resistant gold plated brass connectors and prevent oxidation often found in other low quality wall plates
It’s designed to be used with banana plugs, spades or bare wire. Banana plugs have 3/4″ spacing for use with dual plug adaptors for a quicker and easier installation and removal
1 HDMI 2.0 ports which are backwards compatible with earlier versions of the HDMI specifications, significantly increases bandwidth, 4K video resolution. Up to 32 audio channels for a multi-dimensional immersive audio experience

13 reviews for TNP Home Theater Speaker Wall Plate Outlet –

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Robert E. Hoffman

    Made a wire nest look fairly neat.
    My only complaint is that it wasn’t available in black as it’s in a dark walled home theater. However, it’s behind the receiver so it’s not real visible. It worked as expected and definitely kept the wiring neater and allowed me to run it through the walls.

    Helpful(0) Unhelpful(0)You have already voted this
  2. Joe Doakes

    Ya Just Gotta Have One
    This is a must-have for in-wall wiring of your surround. I chose this one because I installed a 7.2 system with gold-plated jacks and it worked out great. You can get almost any combination of HDMI, subs/surrounds that you need (5.1, 5.2, 7.1, 7.2 etc). Do your planning on location and wire-routing; get good quality speaker wire and HDMI (high-speed with Audio Return Channel); get the remod-style mounting bracket/box then cut your hole at the same height/level as your electrical outlets and preferably between the same studs as your TV’s wire-box so your HDMIs just run straight up to the TV (remember to install the bracket BEFORE you run your wires). When connecting the wires to these terminals, it’s best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it’s best to drill 4 half-inch holes straight up through the bottom plate of the wall and feed your wires up those holes. Tip: If your TV and Surround Receiver are fully compatible you really only need 1 HDMI port on the wall plate, because you can plug your devices into the receiver and just sent the A/V/data to the TV while the audio is returned over the same HDMI.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Amazon Customer

    Its just ok
    It looks cheap and feels cheap

    Helpful(0) Unhelpful(0)You have already voted this
  4. Joshua Wilcox

    Good buy for the price.
    Would have liked to use keystone inserts but this was a good alternative for the cost. Just 1 set of keystone for speakers where $10 bucks and I was able to use coax blanks and the speaker inserts from this at a 3rd of the cost.

    Helpful(0) Unhelpful(0)You have already voted this
  5. K.A.E.

    I would recommend this wall plate
    Great Wall plate.looks and works as described. I use it with 3D HDMI and works perfectly. There are multiple configurations to fit every need. BE VERY SURE of what you want before purchasing. THERE IS A RETURN FEE. I ordered the wrong one and had to pay $6.47 to return them. I did not deduct stars because it was my fault

    Helpful(0) Unhelpful(0)You have already voted this
  6. Amazon Customer

    Not Gold-Plate!!!
    Seeing all the good reviews about this brand , I went ahead and bought one their speaker wall plates, that was advertised as gold-plated. The product that I received, as you can see in the picture, was rusted and ugly upon arrival. Thus, a very low quality product. Will return.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Joseph W.

    Better then I thought
    Better then I thought. I would buy another if I needed to. Everything is good, no problem hooking it up. Received 1 day later then told but that was because of the snow storm we had. Other then that, no problems.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Richard Grier

    Cheap threading causes unavoidable stripping on connector
    Bought this for a new 7.1 surround sound install. Connectors strip when tightening (I’m not over tightening, I’ve done many speaker installs) causing a lose connection. Three of them spin freely and do not make solid connections.UPDATE: After leaving a poor review a replacement unit was shipped to me. I only replaced the Left outlet box that had the spinning connectors. Works like a charm and all of my speakers connected first try with no static or distortion.I also learned (after removing the defective outlet) that if you remove the wire and hand tighten the spinning post it will fully tighten. Then back out just enough and retighten on the wire and it will work without spinning. Thanks TNP

    Helpful(0) Unhelpful(0)You have already voted this
  9. Erik Jalbert

    Je donnerais plus de commentaires une fois installé

    Helpful(0) Unhelpful(0)You have already voted this
  10. Matthew Rossi

    Easy to use. Good product

    Helpful(0) Unhelpful(0)You have already voted this
  11. Peter G

    This is awesome. it was easy to install, connect all the wires inside and looks very clean. The plugs/ends are of good quality. Totally recommend.

    Helpful(0) Unhelpful(0)You have already voted this
  12. Ken Jefferis

    I was pleased with the product. Delivered in less than 48 hours.

    Helpful(0) Unhelpful(0)You have already voted this
  13. Trevor Taylor

    I bought these as inputs for my newly installed 7.2 surround sound system. It looks great and the sound connections are perfect for my needs but the HDMI ports are just passthroughs and that is fine but they bent down inside when I attached the two cables. I tried all 3 and none were great. One broke a screw that holds the adapter in place. Pretty cheap. Anyway, I’m removing that adapter and I’m just lucky that I can pass my in-wall cable through the hole and have it reach my receiver. -1 star for hdmi ports bending, -1 star for one breaking. If you can get separate audio and hdmi faceplates, that’s likely a better option. I wouldn’t “not recommend” it but I’d definitely advise looking around before choosing this one. I did and this was the only faceplate suitable for my specific needs at the time (renovating).

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    TNP Home Theater Speaker Wall Plate Outlet –
    TNP Home Theater Speaker Wall Plate Outlet –

    $25.79

    Omni Tech Hub
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart