Phomemo Label Maker Machine, D30 Portable Handheld

Great Product and some info about QR codes and some easy help to Label Refill woes and confusion.
This product is just great. I have been using it for several weeks now and am constantly in the app thinking up new label ideas.D30 Printer – The product itself is well made, put simply it just works as intended. The printing is fast even if you print a solid black label and DPI is the highest and same as any of the other competitors available. When printing super small there may be some issues with text and legibility. I prefer to keep things simple with 1 or 2 line of big text. At 3 lines it is 100% readable as well. When you start putting super tiny text on there the letters begin to not print as intended due to problems with DPI if I am not mistaken. Letters may not print as they are supposed look thus making it hard to read. We are talking super small at this point though and it is unreasonable to expect to get micro text out of this thing that most people would need magnification to read anyways. Icons still look pretty good even at fairly small sizes. Just buy this one, it is the best one because it has the best ecosystem, the printer is easily equal or best… don’t buy it based on just looks but it looks/is decent, app which is super important is complete meaning all it’s features work unlike many other printers and it has the most label refill options.The APP – The app you need to download can be downloaded and tested before you even buy. I did just that with this and other best sellers and found this app had more icons and the competing apps actually had a similar app always but lacked icons, had usability issues, and some features that did not work yet because the app was not done yet but they still promote the app features as if they worked. This app seems to me like the best app thus making this the best printer IMHO because the app is the most important part of this whole printer label thing. If you are like me you will be spending most of the time with your phone and the app not holding the printer itself obviously until you need to grab your label(s). It may seem trivial but the app is super fun because you get to create things there then ultimately print them out on labels. The app lets you save all your labels and also manage them by deleting some if you want to get rid of some. The app has two modes, a basic simple mode and a more comprehensive mode. Tbh they are both modes are fine and comprehensive mode is very easy to use and has many features to help you create with great tiny precision so I just use that by default. The comprehensive mode is very intuitive and easy to learn to use. I have been in the app a ton since I got the printer and am always creating something new or saving labels I will print or that are or will be handy or fun to use now or later. Again saving everything is huge, because if you print the same things often you can simply select it before you enter creation mode and just print it.QR Code feature in the app – Short version is it works for sure, but filling it to the 200 character limit seems unprintable no matter what. There are two small problems. 1) First, in the app if you increase the size of the of the QR code via dragging the corner it can sometimes distort the shape. This is doesn’t happen every time and I would call it a bug. You want to keep it Square. I suggest two things if resizing the QR code. Copy your text to clipboard before finishing the QR code. Hit the check mark to place it. Don’t move it from where it initially appears on the app, resize it in baby steps and remember there is an undo button if the QR code distorts. If trying for max size move it to the top left corner, then finish resizing it to the max. A max size QR code code does work, so does a smaller default size smaller QR code but the number of characters used may make a difference. Also alternately, instead of undo if you distort the QR code, if you have trouble just delete it and make a new one, paste the clipboard, and try again. The real problem is it seems you cannot use the full 200/200 character limit as I am about to explain. 2) Second links and info work fine in the QR code depending on error correction and size, but you can only use so many characters. I tried using the maximum and it could not be read with it set to either LOW or SUPER as the error correction level. I took a only minutes and printed a few tests and I can print 100/200 characters of text at LOW error correction but not at SUPER error correction. At SUPER, 100 characters, the corners were distorted enough where I could tell directly from the app it was unprintable because the corner blocks were too small to be printed due to DPI limitations. I am sure I can go higher than 100 on LOW for example, but I didn’t want to do a super comprehensive definitive test just for my review. I suggest you guys play around with both character limit and error correction and don’t distort your QR codes!Label refills – Some people and reviewers have had trouble with refills. I came across the same issue as another reviewer yet his solution was drastically different and complicated but the actual issue is trivial but an understandable mistake. The D30 Printer comes pre-loaded with a roll of labels. The labels face outward and you are supposed to put the label side facing the printer head thus it feeds through the left of the circular chamber when you use that first roll. However the refills I purchased came wound up differently so the label faced the inward. I believe this may have been a change in the way they were wound up by the manufacturer and that is all. This means that to get the labels on the printer head you need to feed them through the right side of the circular chamber instead(see my image, that is a refill roll fed through right side). That is all. To me it was obvious but I understand the confusion as the product didn’t comer out of the box that way and I too initially fed the refill roll to the left and was confused. Again to recap the D30 comes with a roll with labels on the outside/up and the refills seem to be wound now with the label facing inside/down so need to be fed through the right. Just remember label has to face the printer head or it will obviously try and print on the back of the label paper that you throw away.Customer Support – Top notch 5 Star customer support that responded pretty fast. I genuinely believe they are trying hard to support their products and will continue well into the future and meet their customers expectations and are responsive to feedback and actually try to fix issues that arise.At times I am so bored but since getting the D30 printer I have been so distracted and immersed for weeks in the app creating and thinking of new labels. I have even seen some mental health benefits, my anxiety and stress I suffer from have gone down some because I am in the app so often. Who knew a simple label maker could be so fun!

Super cute and does the job well
This is a super cute label maker that’s perfect if you just need to label a few things around the house. I personally used it for my card collection and it’s worked great so far. The app was very easy to connect to and there is virtually no lag when printing labels- it’s super fast. It’s not very loud and is small enough that you can store it anywhere without it taking up too much room. The app is super cool too; there’s a whole bunch of fonts and sizes you can choose from and each label is HIGHLY customizable.

Portable and easy to use
This is perfect for my office and when helping other teachers organize. I have had so many friends buy it because of how functional it is and small! It gets the job done and is also cute!

Great Function so Far
I love this label maker. Maybe it’s too soon to write a review being that I got this label maker today and have only tested it out to make these binder divider tab stickers, but it functioned great with these! The app is surprisingly better than I thought it would be, with a ton of different customization options. There is also a lot of premade templates in the app that help with sticker ideas and quick use. Great product to help with organization.

Súper bien esta máquina, tiene opciones para acomodar las hileras de letras y el tamaño, las etiquetas están muy bien para frascos pequeños de 250 ml se ven bien, para frascos de 500 ml ya se ven pequeñas pero muy útil para identificar el producto del recipiente. No se corre la tinta al pegar las etiquetas y son plastificadas, esto ayuda a que duren más.

Einfach und genial. Nur zu empfehlen.