Midea 8,000 BTU U Shaped Smart Inverter Window Air

Quiet, cold, and relatively easy to install
We bought the Midea 8000 BTU unit to replace a portable rolling unit we use in the kitchen/breakfast area during the hot Georgia summers. The biggest complaint about the portable unit was the noise which made conversation difficult. I’ll start with the pros and cons and then describe our experience so far.Pros:- Much quieter than the portable unit we had. From about 4 feet away with the compressor on and the fan on high, it’s about 65 dB. With the compressor off, and the fan on low, it’s about 45 dB. I should have tested the sound level on the portable unit first, but I’d estimate that it’s about 80 dB.- The Midea puts out some seriously cold air. My wife said “it’s too cold”, and turned the temperature up 🙂 It easily keeps our kitchen cold and would work in a much larger room.- The installation is relatively easy even for one person. I watched a Youtube video two times before starting, and it was straightforward. That said, I did take my time and start to finish including cleanup took me about 3 hours.Cons:- There are small gaps where the bracket attaches on the interior side of the window and also where the unit sits on top of the bracket. Not a big deal, but you have to take extra sealing foam strip and stuff it into the gaps to keep out bugs and a small amount of outdoor air. The gaps are maybe 1/4″ at most, but you still want to seal those up.- The unit is small but it still takes up some window area. The saddle style does better in that regard but costs almost twice as much.- The unit might be heavy for some for solo installation. I’m a small but fit guy, and managed it fairly easily using a small table to set it on before sliding it into place.We received the Midea unit in 8 days and did not have any issues with the condition of unit or packaging. All good there.I started the installation at about 8:30 am when it was still cool. The window is 23″ inches wide and has a wood frame and a storm window. That wood frame point is important because the installation is different than the vinyl frame installation I watched on Youtube. Vinyl windows have an interior lip that helps hold the bracket in place before the bracket has been screwed in. On a wood frame, there’s nothing to hold the bracket from sliding out the open window because of the weight of the outside part of the bracket. In fairness, you can unscrew the interior portion of the bracket from the extern part, but the screws were under some insulating foam so I chose not to do that. I ended up taking a 4″ piece of scrap 2×4 and wedging it between the storm window frame and the bracket. That kept it in place while I screwed in the bracket to the side of the window frame. The remainder of the bracket install was easy. I setup up the outside supports so it was slightly lower on the outside for proper drainage. The manual describes it as being 1/4 bubble on a level. Ours is probably slightly more than that with the weight of unit on the bracket. Be aware that storm windows can prevent the unit from leveling properly, specifically, sloped toward the interior which you don’t want. We did not experience that issue, so we did not have to add a piece off wood on the interior to raise the height.I thought I was going to need help lifting the unit into position. The description says 55 lbs, but it didn’t feel quite that heavy to me. I got a small wooden table that was almost the exact height of the window and put that directly next to the window. I put the unit on the table first which was the heavy lifting part. Once on the table, I could line it up with the window with having to hold the weight of the unit. I then carefully slid the unit into position on the bracket with the table bear most of the load until the unit was fully on the bracket. The brackets and the bottom of unit are a durable painted finish and slid easily once the unit was more a less in place on the bracket. What I thought was going to be the hard part was actually the easiest.The last part of he install was getting all the sealing faom in place. This actually probably took the longest and was simple but tedious. Midea recommends cutting the side foam blocks 1/4″ over the measured length. I found that hard to fit into the gap and had to cut it back by 1/8″. Also, the wood frame requires a second foam block below the main one, and that has to go around the bracket piece that’s screwed into the side of the frame. To get that to work, I had to cut some partil vertical slits in the foam block to fit properly over the bracket. The anti-tip brackets have to slide over the side foam, and that was difficult because the foam was too tall despite being firmly seated on the bottom. I had to press the foam down with either my finger or a screw driver, move the bracket a little bit, then repeat the process several times until the anti-slip bracket was in place. Not a huge deal, but it wasn’t as simple as just sliding the anti-slip bracket in place. Last, I looked all around the mounting of the unit and sealed up any tiny gaps with some foam stripping I had around. There were pretty small gaps, but if you have a lot insects like we do here in Georgia, you’ll want to seal those up.The whole install took me about 3 hours including cleanup. I wasn’t in a hurry, and I took my time to make sure I did everything correctly. I looked at the instructions some, but mostly worked from memory from the Youtube video. As with almost every project there are little idiosyncracies that you have to handle. For example, I bet it took me about 10 minutes just to get the storm window screen out. That was annoying. Having another person might have shortened the install time as well. Overall, I’d say the install was pretty easy after figuring out how to hold the bracket in place to put the initial screws in place. Having two people would have really helped with that part.The unit is definitely quiet and puts out significant cold air. My wife said it was “too cold” and turned the temp up from 70 to 73. It got up to 92 today, and the unit has been cycling on and off (mostly off) while keeping the kitchen nice and cool. The remote has a decent sized display and does what you expect it to. We also connected the unit to the Midea Air app, and again, it does what you expect it to. The app also shows the local weather which is a nice feature.All in all, the Midea is a huge improvement over the portable unit it replaced. It keeps the kitchen cool and does it quietly. It’s also a good value based on comparisons we did with other brands and styles. We would definitely buy this a/c again and would recommend it to others with similar applcations.

Excelente producto, cumplió con mis expectativas ! Enfría muy rápido la habitación en pocos minutos y fácil de instalar!

This is a fantastic product for two reasons. It is QUIET, and it is energy efficient.FIVE STAR PART: The unit installs in classic vertical sash windows, but unlike conventional window units, it separates the compressor, motors, and fans from the controls by allowing the lower sash to divide these elements. Brilliant: efficient moving components outside and cool, dry air inside. The space for the lower sash is also wide enough to permit a window blind to function in the gap. This allows light blocking, which is not something one would have thought important, but is, and it is very slick. The marketing literature talks about being able to operate the lower slider if you want fresh air, which seems silly. There is already a fan setting to bring in fresh air, and it is a fair bit of effort to make sure everything reseals when moving the sash. I think the marketing team went a little too far in this one and the notion detracts attention from the overall design excellence of the product.It is very thoughtful to include a remote control for those needing one, and the voice access through Wi-Fi provides even more accessibility options. I am fortunate enough to not need these, and the on-board control layout of the unit is excellent! Although it took me a while to get used to a display that only showed the temperature setting and not the room temperature, it turned out that the unit is so good that there is rarely a difference anyway.THREE STAR PART: You may have a little effort on your part to get the mounting bracket to work, since it is designed for specific sill configurations. A few people must be lucky, and it all works out, but our outer sill was too big. So, when the unit is installed, we put a conveniently sized brick on top of the sill (shown in the picture) and don’t use the rear angled support arms. We also put a thin piece of rubber between the metal of the mounting bracket and brick to reduce possible vibration transmission. (My calculations show it’s very safe since the majority of load goes through the wall of the house in compression. Plus, the additional load is quite small. But we leave critical decisions of this nature to lawyers; think of this a shared experience from a questionable source.) Once you get the unit positioning sorted out, the mounting bracket is a dream, and next year’s install will be easy-peasy.I strongly recommend this unit! The price and effort are well worth it but do your homework.

This air conditioner is quiet, cools the room quickly, easy to program. I put 4 stars because it took 2 people to install this for me ..It’s very heavy and it took them about an hour to install this air conditioner. I would recommend this air conditioner to anyone.