Fridge machine stand suit for indoor drying furnit

Subtle differences make a huge difference robuster than others
**Background:** so I initially ordered one similar on amazon to this because we have a mini fridge that I want to put right above a floor return vent for our house heating air conditioning system. I wasn’t completely happy with it as I was hoping it would be more robust but the end of the day I think it’s strong enough to do his job (brand Flamiracle).I was not perfect but liked it enough to look for another one for a mini fridge we have in the basement. We sometimes get a little bit of water in there and if I can keep that mini fridge off the floor, it’s all the better. So I ordered this Maewdery fridge stand.And at first glance, they almost look identical, but wow, the subtle little differences definitely make this Maewdery better on all areas except one or two things** crossmembers**They both have cross members that are built similar to budget towel, racks their square tubes and they connect the four corners. However, this one is 1″ x 1″ where is the other one was three-quarter by three-quarter but more importantly the wall thickness was .456 mm whereas the other brand was .292 mm just by pushing on the sides of these tubes, I can feel the difference. Neither one is ridiculously strong, but the other brand is scary soft.**Leggs** this one also has larger diameter and thicker wall legs. I can’t measure the legs cause there’s plastic sleeves on both sides, but you can definitely feel the difference. This also has much wider feet to kind of dorky looking, but they’re definitely wider. I also like the adjustability mechanism. The bottom feet are large screws that screw into the cylinder and you adjust a height by turning the base and then there’s a locking collar once you get the right height. The only thing I don’t like about the legs is on the bottom there’s like a rubber suction cup and in the middle of that is a little screw if you have delicate floors, and you slide this around with a heavy weight on top of it the screw head might scratch the floor. You could throw a piece of tape over it or just be mindful and not slide it around.**Adjustability*** one of the issues I had with the other one was that it didn’t get a small enough shape in my mini fridge. Front legs are only 14 inches apart in the back support bar and the front legs are also about 15 inches the other one claimed to get down to 16 inches but really didn’t wear this one actually gets to 16 inches and if you go from the center of the support legs, it’s even closer to like 15 inches which is a better fit for my mini fridge which is a 3.4 cubic feet.I also like the way the legs just like mentioned above the threading mechanism makes it easy to level that fridge out, but also adjust the overall height.I’m using this for my fridge above the heating vent and I will relocate the other one to the basement. This one is much more robust and I actually store three 5 gallon water jugs (~125 pounds) on a rack on top of the mini fridge. I am very comfortable with the ability of this rack to support that weight.Maewdery is definitely more robust than the Flamiracle. I think it’s priced a little higher, but I think it’s worth it for the extra robustness. However, the other one comes with a silicone pad that you can put underneath the stand to catch any condensation water. But at the end of the day, I’d rather have a better stand, and if I need a pad, I can always get one separately.Both of the sellers have photos of using these stands for a a washing machine. It was definitely my opinion that Flamiracle stand was not robust enough for a washing machine. The Maewdery it’s definitely more robust on all aspects except for one thing the legs mount to the four corner brackets via short little screws. Front loading washing machine shake violently when they have an unbalanced load and that results in a lot of side torque to whatever it’s on top of, and I think those screws would eventually fail. So again, even though this is generally more robust, I think they have the same week point.I’m giving this one five stars cause I am always about over engineering things and this one is definitely more robust and is definitely strong enough for a decent size mini fridge and maybe even something larger if you’re very careful about how you put it on and it doesn’t have a lot of vibration in use.

Most durable
I was surprised at design and construction, really clever and super strong now getting front load washer on it will be tricky, think I need help there. Easy to assemble and will get washer off floor some which should help immensely.