Cable Matters Double Gang 5.1 Speaker Wall Plate (
$19.99
Price: $19.99
(as of Feb 27, 2025 03:58:13 UTC – Details)
From the brand
Cable Matters, with headquarters in Southborough, Massachusetts, offers a complete line of cables, adapters, docking stations, and networking products for the home, office, and data center. Cable Matters offers first-class, quality, and affordable products backed by an exceptional customer experience.
Versatile Wall Plates
2 gang home theater wall plate can connect 5 speakers and 1 subwoofer; Install audio wall plate in a standard double gang outlet or low voltage bracket for your home theater system; Low-profile Speaker wire wall plate is 4.5 x 4.5 x 0.2 inches; Mounting screws are included
Screw type binding post banana plug wall plate with adjustable thumb screws can be used with banana plugs, spade connectors, or bare 12 to 18 AWG speaker wires; 5 speaker wall plate is labeled for the front, rear and center speakers; Binding post terminals on speaker wall plate have red and black ring labels on the front and rear of the 5.1 wall plate for easy identification
Subwoofer wall plate with a female coupler can connect an RCA subwoofer cable concealed behind the wall; Install this speaker faceplate in the ideal location at an existing wall plate location or new outlet location for a 5 1 receiver upgrade
Three-piece surround sound wall plate 5.1 includes a faceplate and two inserts for a quick installation; Home theater wall plate with gold-plated binding post and RCA connectors provide a reliable connection and distribute authentic audio
5 1 surround sound distribution wall plate connects 5 speakers and 1 sub; Conceal cables behind the wall in your media room for a professional looking installation; Includes a lifetime warranty for peace of mind when purchasing
Prrbaldwin –
Very well made and easy to use!
What a great finish to my Stereo system! The gold plated connectors all were tight and the banana plugs fit tight. The double screws on the banana plugs were a nice hard brass and did not distort while tightening with a screwdriver. 16ga wire fit perfect. Highly recommended!
Dennis Bell –
Perfect for running concealed speaker wiring
Bought these so I could conceal the wiring for surround speakers and they’re perfect! The connectors seem to be very solid and allow quick disconnect of the speakers from the wall. I used standard electrical boxes to mount them which provided plenty of space behind the plate for the wiring. I used 12 gauge speaker wiring to minimize the loss for a long run and these plates worked fine for that size wiring. I recommend these if you are looking to run in-wall speaker wiring.
J. Pagan –
looks really nice!
well my old wall plate was supposed to be white. but the previous home owners smoke, so it was stained in yellow. setup was easy and somehow i still mixed 2 lines. whished there was a label section in the front. Its one of those things of set it and forget it things.
Amazon Customer –
Feel cheap but are cheap
These work as intended, and were easy to instalThey match up size with with regular outlet boxes.The screws are super cheap, I replaced them.Overall I’d give them 5 stars but that they just feel cheap, like cheap plastic covers. However I can’t fault them much when they did cost much less than the ones in store
Fountain-head –
Nice clean speaker terminal install
I pre-wired my home addition with Canare 4s11 speaker cable, which is a 4 conductor 14AWG cable. I was able to pair-up two reds and two whites and feed through the rear terminals … tighten them down (no bare wires touching) with no issues. And install in a conventional plastic duplex outlet box (modified for speaker cables). The construction is sturdy enough to receive a couple different type banana plugs (sorry, my homemade speaker cables were made up from the only hardware I had laying around) . The coil sleeve type (Viablue) and the expanding pin type both fit snugly and the sound is superb.My only complaint is the Phillips/blade combo screw to the cover plate doesn’t match my standard Leviton plates … I know, I know … First World problems. But it bugs me … and yeah, it would have been nice if the white plastic matched the Leviton white. Oh well … I’ll get over it.
John C. Garcia –
Good quality
Did the job!
Spraynard Kruger –
Pretty great
Used a few packs of these to terminate speaker wire runs in my home theater. Very easy for a nitwit like me to install, no duds, everything sounds great.
Reviewer –
Exactly what I wanted
I’m running class 3 audio cable down the back walls of my living room for an Atmos installation. These wall plates helped me convert the cable types just perfectly. I’d get these again for sure.
Me –
Worked well even with 10 gauge. I soldered the beaded wire before clamping them in the back.
Daniel Freeman –
Me gustó mucho para organizar los cables de las bocinas de mi home theater. Vale mucho la pena. Además, la calidad de los materiales con los que está hecha la placa se sienten que son de una muy buena.
Cliente de Amazon –
También muy bueno para mí sistema de sonido
Gerson –
Good product
Michel Couillard –
Facile à instaler et correct