MARTY Printer Stand with Storage for Desk, Desktop

Easy to put together and fit my printer nicely.
Was exactly what I wanted. It was quick and easy to put together. Came with the tool to assemble it. Didn’t come with instructions but had an easy video to watch that explained how to do it very easily. Great size, and fit my printer perfectly. Looks great. Matches my desk and is very stable! Great purchase.

Please Read. 100% worth the cost.
This is hands down the most thoughtful piece of low-priced furniture I’ve purchased on Amazon.Overview:Great packaging, thoughtful design, sturdy product with quick assembly time (<10min)Packaging:Comes in an efficiently thin package. Good quality cardboard box. Minimal Styrofoam but adequately protective. No worries of damage in shipping.No tape, no shrink-wrap, pieces just fit together like a puzzle and gaps filled with a couple of foam blocks.Hardware packaged in standard plastic bags. Instructions in a simple fold.Instructions:Single sheet. Easy to read, easy to follow. All parts clearly labeled. Clear images.Hardware:Not only do they provide you with the hex wrench that you need but you get no-slip silicone feet with 3M adhesive backing or if you want a more secure mount: 3M double-sided mounting tape cut in circles on a strip.What's more is that they provide MORE than you actually need. 8 double sided tape circles (2 strips of 4) and 5 silicone feet (you only need 4.)There are 2 types of screws, easily discernable, and they are blunt tipped so they won't go deeper than they need to nor pierce the pressboard.These too also came with one spare of each type.Stand surface:It's typical pressboard with a coating overlay. What's impressive about the actual surface board though is that the pre-drilled holes for the screws actually contain plastic mounts so even if you overtighten you won't split the board (see pictures.)The ONLY negative I can find is basically just a warning for when you're assembling it: there are certain areas where the screws connect on the support metal that do not have internal braces so overtightening can bend the metal a little. Just be careful.Once built, which took under 10 minutes, the stand has a simple and pleasant look and feels very sturdy.I can't say enough good things about this printer stand. Well done on this MARTY brand.

Useful item
Easy to assemble. Substantial material. Works for 2 printers over/under. Needs to be about 1-2 inches taller.

great shelf
This product was easy to put together and is very stable. It is not distracting from my room and very functional. Perfect for what I wanted!

أنصح بشراء المنتج لان صناعة ذات جودة عالية جداملمس الطاولة ناعم ونظيف ونفس التي بالصورة وسوف أكرر الشراء من هذا الماركة أو المتجر

Good sturdy item. Simple construction. Does what it was meant for.