Fosmon 2-Gang 7.1 Surround Sound Distribution Home
Original price was: $32.99.$23.99Current price is: $23.99.
Price: $32.99 - $23.99
(as of Mar 03, 2025 15:55:40 UTC – Details)
From the brand
GAMING ACCESSORIES
TRAVEL ACCESSORIES
Timer Outlets
HDMI Accessories
HDMI Accessories
Xbox Gaming Accessories
Travel Accessories
PS5 Accessories
Indoor & Outdoor Timer Outlets
Built with high quality gold plated copper connectors that resist oxidation and corrosion (Gang box/Mounting bracket not included)
Easy to install and remove with no soldering or special tools required. Mounts to standard size gang boxes.
Eliminate the clutter of wiring along your baseboards which results in a clean and tidy installation. Matching binding posts on front and back with color coded thumbscrews.
2 RCA jacks. Allows connection of up to 7 speakers, 2 subwoofers. Dedicated labeling on the front plate. Use with banana plugs, spades or bare wire.
Accommodates banana plugs on both front and back sides of the plate at the same time depending on depth of gang box.
13 reviews for Fosmon 2-Gang 7.1 Surround Sound Distribution Home
Add a review
Related Products
Original price was: $32.99.$23.99Current price is: $23.99.
Amazon Customer –
Excellent Product!
These worked perfectly to hook up my speaker system. I have a 5.1 system with 2 additional zone 2 speakers in an adjacent room. This cleaned up my wiring mess. Easy to install. Great look afterwards. Really has a good heft to it, solid product. Connected my bare wire to the back (inside wall side) without any problem. I am using banana plugs on the front. Makes a great connection between my receiver and speakers. Purchased Fosmon [3-Gang 7.1 Surround Distribution] Home Theater Wall Plate – Premium Quality Gold Plated Copper Banana Binding Post Coupler Type Wall Plate for 7 Speakers, 1 RCA Jack for Subwoofer & 1 High Speed HDMI Port with Ethernet (White) for the other side of my basement as my needs are slightly different. Both products are great and would not hesitate to buy either again.
Nate –
Great 7.2 Speaker Wall Plate
Very professional well made 7.2 Home Theater wall plate. The title description states 7.1 but it is indeed a 7.2 speaker wall plate as the picture shows.Pros- price! ( cheapest 7.2 wall plate available)- well made (looks professional, terminals are tight and functional)- fits great with banana clips in-wall (i used Monoprice’s “closed screw” banana clips on both sides)- all necessary screw hardware is included (fits a standard 2-gang low voltage new construction from Lowe’s)- 2-gang availablilty. (most 7.2 plates take a 3-gang and require a bigger hole in the wall)I just used a label maker to label the ports the way i want them and its working great. great bang for your buck.
Rage Kage –
solid product, a bit crowded though
the product is well-made, but the configuration makes the wiring a bit too close together to work with easily. Next time I use one of these I will likely get versions with only 6 connectors per plate instead of 8 to prevent overcrowding.
Brian Williams –
Good speaker plate.
Good quality, I did have to wrench down the terminals with pliers, twice they backed off after being tight. Seems to be holding good now. Not a problem if your using banana jacks. Also fits great even into other wall plates.
Springspeed –
In wall speaker terminals
If your setting up a surround sound system with in wall speakers this is it.
Andy B –
Right product – Right price
Same product that you get in the stores for about half the price. If you have the two gang back box, then very easy to install, if not, then you will need to make some wall mods.The product itself overall was excellent, decent quality and as good as anything I have purchased from Home Depot or Radio shack. The only thing lacking for this product were some label markers for the outlets (front left and front right etc…) – even if they had provided some labels for you to apply it would have been much better, not to worry though, as long as you have a PC and a printer you can make your own.
David –
Scratched… and then Resolved
Great product for an excellent price, but came with a scratch on it. The faceplate will be covered by furniture, so it isn’t a deal breaker. I am excited as this will clean up my wiring mess.Update:They seller has reached out and resolved my issue concerning the scratch. I am grateful for their help, and I would not hesitate to buy another product from them again.
hitech –
Nice looking wall plate to tidy up your speaker wiring…but make sure to buy some faceplate screws to go with it!
Great wall plate to finish up your home theatre setup for a clean look…problem is it DID NOT come with any white faceplate screws to mount to standard 2-gang low voltage wall plate. I assume they think you’ll mount this directly to drywall, which would not be very durable if it stayed attached at all.The screws are shown in the picture of the product, so it’s a mystery why they are not included. I am not the first reviewer of this particular model that ran into this, either. Prehaps they won’t line up with most 2-gang boxes, but it would still be nice to have them without having to go out and make another, unexpected purchase.
Titanium Tom –
Easy to hook up the wires and unit has not malfunctioned in the last 1.5 years since installation. I use every connector on my system.
Tom –
Habe mir diese Anschlussdose gekauft für die Umschaltung von 2 Receiver auf einmal 2.1 und einmal 5.1 Boxen.Die Qualität ist für den Preis sehr gut. Einzelne Einbaubuchsen kosten das 10 fache. Die Bananenstecker von Nakamichipassen ebenfalls sehr gut in die Buchsen. Die Innenseite hat auch Überwurfmuttern zum klemmen der Lautsprecherkabel,die habe ich aber nicht verwendet sondern direkt angelötet, die Buchsen sind aus Messing geht deshalb gut zu löten.
Neal McCall –
Easy to wire
OA –
Excellent product that was delivered as promised. Straightforward and easy to install.
makosim –
Ist noch nicht eingebaut